Buy "fluke" online - search for the best price - compare prices

Vinyl protective case with two inside pockets Designed to carry voltage probes test leads test probes...

For use with type-K thermocouples in low voltage applications(below 24 V AC, 60 V DC)Measurement range: -50 to 1000? C (probe dependent)One year warranty This simply converts a DMM to a thermometer. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks Large...

The Fluke I1010 is a 1000 Amps AC/DC Current Clamp for DMMs. This Fluke current clamp is ideal tool to extend the current ranges of digital MultimetersBattery-powered Hall-effect probe measures 1 Amps to 1000 Amps1mV/Amps output guarantees easy reading on your meterTake accurate current readings without breaking the circuit The i1010 AC/DC current clamp allows Multimeters to measure up to 600A AC or 1000A DC.? Current range: 1A to 600A AC or 1A to 1000A DC.? Basic accuracy DC or 45Hz to 400Hz: +/- (2 percent of reading +0.5A).? Output signal: 1mV/A AC/DC.? Frequency range: 45Hz to 2kHz. Bandwidth: 10kHz? ? ? Working voltage: 600V AC RMS.? Maximum conductor size: one 30 cm (1.18") or two 25mm (0.98") diameter.? Safety rating: EN61010, CAT III 600V.? ? ? ? ? ?. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

Amp clamp with 2.1 meter output cable with shrouded banana plugsClamp accommodates up to 1.18" maximum conductor diameterZero error adjustmentCAT III, 600V safety rating I410 Measures starting and charging currents up to 400 amps. Take accurate current readings without breaking the circuit. Maximum conductor ? 32mm. One year warranty. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

Large, easy to read LCD displayAuto and manual rangingData holdMAX capture function for inrush current measurements (30 mS response)Diode test Where accuracy, quality, and newest technology meet. The APBACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics with Red, Rubber, Ribs design.? With relative zero mode, auto power off, audible continuity and accommodates conductors up to 2.00" in diameter. "Third hand" test probe holder. Rubber over-molded case with built in probes storage. Comes with carrying case, test leads, batteries (installed) and user manual. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

Performs all standard electrical test for on-car and bench troubleshootingTests engine RPM and dwellCapacitance, Frequency and TemperatureMeasures DC/AC voltage, DC/AC current, resistance, diodes and continuity beeper, duty cycleAccurate RPM measurements for 2 and 4 stroke automotive engines using the inductive probe Model AU92 is a full featured multimeter that has additional measurement for automotive servicing. It offers a built in thermometer to measure air, surface or immersion temperatures. The meter also tests engine RPM and dwell in addition to standard multimeter features of voltage, current, resistance and continuity. Perform accurate RPM measurements for 2 and 4 stroke automotive engines using Inductive pick up tool. Other features include: locates faulty wiring and components, data hold button retains display data. Includes inductive pick-up probe carrying case, test leads, test lead extender tips, threaded alligator clips, type k temperature probe and spare fuse. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

The Fluke 88V automotive multimeter with the measurement functions and accuracy to solve virtually...

Display 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999Polarity Automatic, positive implied, negative polarity indicationOverrange (OL) or (-OL) is displayedMeasurement rate 2.5 times per second nominalVolTect non contact voltage (NVC) detection The Amprobe APB5XP-A digital millimeter provides superior features and accuracy in a smaller form factor. The 5XP-A has unique features such as VolTect non-contact voltage (NVC) detection and our exclusive Magne-Grip holster that frees both hands for work. The APB5XP-A is the right choice for residential, commercial and general troubleshooting applications. Other features: zero: automatic; low battery indication; operating environment 0 degree C to 50 degree C. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

Check continuity, frequency, capacitance and diode testMeasures 20 A (30 seconds momentary; 10 A continuous)True-rms for accurate measurements on non-linear loadsCAT III 600 V safety ratedLarge white LED backlight to work in poorly lit areas The FLU115 is the solution for a wide variety of electrical and electronic testing applications. Features Min/Max/Average with elapsed time to record signal fluctuations.? This True-RMS meter provides easy one-handed operation in a compact package.? Includes TL75 Test leads, holster, User? s manual and 9 V battery (installed). Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

88V multimeter alone. See FLU 88VA for the full automotive multimeter kit. Volts ohms amps continuity...

Temperature measurement capability to 1000 degrees C/1832 degrees F.750 V AC/1000 V DC - highest voltage rating in this class of meterChecks resistance, continuity, capacitance and frequencyMagne-Grip holster to allows both hands for lead holdingVolTect non-contact voltage detector A compact, full-featured digital multimeter for plant maintenance, HVAC, electrical and electronic applications. Data hold freezes display. Triple safety ratings. Operating environment 0 degrees C to 50 degrees C at. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

Wide 1000 V measurement range10 amps continuousMinimum / Maximum to record signal fluctuationsAuto and manual rangingLarge display Versatile meter for field service or bench repair, the new FLU77-4 digital millimeter has the features needed to repair most electrical and electronic problems.? This meter is simple to use and has significant improvements over Fluke? s original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that? s easier to view.? Other features include: average responding ac measurements; 0.3% accuracy; frequency and capacitance; resistant and continuity.? Includes backlight for work in dim areas, and an integral holster with probe holders.? Multimeter includes a limited lifetime warranty, test leads, battery and manual.? UL and CSA approved. Meets measurement category 1000 V CAT III and Category IV 600 V safety standards.? Made in USA.?. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

6000 counts, 3-3/4-digitsMeasure up to 1000V AC and DCAuto and manual ranging for maximum flexibilityAnalog bar graph for fast changing or unstable signalsMeasure up to 10 A, 20 A for up to 30 seconds Frequency to 200kHz and percent duty cycle.? Resistance, continuity and diode test.? 10,000? F capacitance range for components and motor caps.? Min/Max-Average recording with Min/Max Alert to capture variations automatically.? Peak capture to record transients as fast as 250? s. Relative mode to remove test lead interference from low ohms measurements.? Auto and manual ranging for maximum flexibility.? Touch Hold to capture stable readings avoiding noisy signals.? Large display digits and two-level bright white backlight for increased visibility.? Analog bar graph for fast changing or unstable signals.? Input Alert provides audible warning against wrong use of input jacks.? Improved selectable sleep mode for long battery life.? Access door for fast battery changes without breaking the calibration seal.? "Classic" design with new removable holster with built in test lead and probe storage. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrumentLarge digital display, 6000 counts, 3-3/4-digitsMeasure up to 1000V AC and DCAuto and manual ranging for maximum flexibility Industrial True RMS Multimeter with Temperature Measure up to 1000V AC and DC.? Built in thermometer lets you carry one less tool.? Withstands hazardous 8,000 volt spikes caused by load switching.? Analog bar graph for fast changing or unstable signals. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

One pair (red, black) of comfort grip probes48" PVC insulated test leads with right snglr shrouded banana plugsRecommended for general purpose measurementsCAT IV 600 V, CAT III 1000 V, 10 A rating. UL listedOne year warranty. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

Compact UV flashlight uncovers refrigerant leaks instantly The RLD2 combines leak detection ability...

Insulation test voltages 50V, 100V, 250V, 500V, 1000V Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protectionAuto-discharge of capacitive voltage for added user protectionAC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance, ContinuityTesting for capacitance, diode, temperature, Min/Max and frequency Insulation Multimeter combines a digital 1 Kv insulation tester and full featured true-rms Digital Multimeter in a single compact hand held unit. It ? provides maximum versatility for both troubleshooting and preventive maintenance. Like other tools from Fluke, the 1587 is rugged, reliable and easy to use.? Whether you work? on motors, generators, cables, or switch gear, this Insulation Multimeter is ideally suited to help you with your task.? It includes a remote probe, test leads, alligator clips, K-type thermocouple, four AA alkaline batteries, quick reference guide,? CD Rom with manual all included in a hard case, that allows you to bring everything ? you need for the job!. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

Inductive Pickup for both conventional and distributor-less (DIS) ignitions For use with the Fluke 78 or 88. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

Insulation test voltages: 50V, 100V, 250V, 500V and 1000VSave both time and money with Automatic calculation of Polarization Index and Dielectric Absorption RatioMake repetitive test simple and easy with the Compare (Pass/Fail) functionCAT IV 600V over-voltage category rating for added user protection Fluke 1507 is compact, rugged, reliable and easy to use. With its multiple test voltage it is ideal for many troubleshooting, commissioning and preventative maintenance applications. Additional features, like the remote probe on this tool saves both time and money when performing tests. Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection. Auto-discharge of capacitive voltage for added user protection. AC/DC voltage: 0.1 V to 600 V; 200 am continuity. Four AA alkaline batteries for at least 1000 insulation tests. Comes with a one year warranty. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

Combines a digital insulation tester with a full-featured true RMS digital multimeter Single compact...

Small pin allows self-healing of the insulationCAT IV 600V, CAT III 1000 V, 5 A ratingUL listedSingle probe pierces 0.25 to 1.5 mm insulated wireOne year warranty. This insulated clip pierces 30 to 14 AWG insulated wires with an extremely small, hardened pin, to allow for maximum integrity of the insulation.? It requires either TL22 or TL24 test leads 1000V overvoltage installation CAT III per IEC-1010, 5A rating.? For use only with shrouded test leads having standard diameter banana plugs.? One probe per package.? ?. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.

Measures AC and DC Current in Low MilliampsMilliamps readings from single milliamp to 40A1 mA resolution for quick circuit comparison19mm Jaw openingPush button DC Auto Zero for correct measurements Compact size ideal for taking measurements in constricted areas under the hood.? . Most Diagnostic Tools products are available for in-store pickup from Advance Auto Parts.

Measures AC and DC voltage, resistance, continuity with beeper, capacitance and frequencyFully auto ranging with 7 measurement functions and 27 rangesLarge oversize digital display with measurement results and the unit iconData hold freezes measurement value onAutomatic power off This shirt-pocket sized meter is only 3/8" thick and weighs less than 3 oz. With full functionality offering AC and DC voltage to 600 V, resistance to 40 Megohm, capacitance to 3000 ? F, frequency to 1 MHz, continuity with /beeper, and diode test. Fully auto ranging, this meter offers seven different measurement functions with 27 full ranges of measurement. The digital display is oversized with large digits and annunciators. In spite of its size, this meter is fully safety rated to CAT III 300 V, CAT II 600 V and is UL listed. No other meter offers this small size with such performance and high safety ratings. Includes battery (installed) and user's manual. 1 year warranty. Most Engine Diagnostics & Flush products are available for in-store pickup from Advance Auto Parts.

Compatible with all Fluke and most popular DMMsDigital pressure and vacuum measurements in a single moduleTransducer sealed in 316 stainless steel compatible with variety of liquids and gasesMeasures vacuum to 76 cm HgDisplays results in English (psig of Hg) or metric (kPa or cm Hg) units This highly accurate pressure transducer measures from 0.5 to 350 psig (3.447 to 2413 kPa) and 0 to 29.9" Hg (0 to 76cm Hg).? It's compatible with any automotive fluid, such as oil or coolant, or any gas, such as R-12, R-134A.? One-year warranty. Most Tools & Testers products are available for in-store pickup from Advance Auto Parts.