Buy "rough country" online - search for the best price - compare prices

Notes: Tightening The bolts with the vehicle raised may cause premature bushing wear due to preloading the bushings! Rough Country X-Flex Control Arms - Rear Lower Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK X-Flex Control Arms - Rear LowerRear Lower. Inlcudes tubular adjustable control arms with X-Flex Joints, polyurethane busings, sleeves, and grease fittings.Fully adjustable control arms replace your factory stamped sheet metal OE arms and allow for better articulation and more control off road but does not sacrifice on road handling. They feature our rebuildable X-Flex joints, are fully greasable, and come with highly durable polyurethane bushings. A must have for a trail ready Jeep. Allows for greater articulation off-road. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Notes: Tightening The bolts with the vehicle raised may cause premature bushing wear due to preloading the bushings! Rough Country X-Flex Control Arms - Rear Upper Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK X-Flex Control Arms - Rear UpperRear Upper. Inlcudes tubular adjustable control arms with X-Flex Joints, polyurethane busings, sleeves, and grease fittings.Fully adjustable control arms replace your factory stamped sheet metal OE arms and allow for better articulation and more control off road but does not sacrifice on road handling. They feature our rebuildable X-Flex joints, are fully greasable, and come with highly durable polyurethane bushings. A must have for a trail ready Jeep. Allows for greater articulation off-road. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Rough Country X-Flex Lower Control Arms, Pair Notes: Tightening The bolts with the vehicle raised may cause premature bushing wear due to preloading the bushings! Fits: 1984-2001 Jeep Cherokee XJ - Front (4.5"-6.5" Lift) 1993-1998 Jeep Grand Cherokee ZJ - Front & Rear (4"-6" Lift) 1997-2006 Jeep Wrangler TJ - Front & Rear (4"-6" Lift) X-Flex Adjustable Arms Fully adjustable control arms allow for better articulation and more control off road but does not sacrifice on road handling. They are fully greasable, and come with highly durable polyurethane bushings. A must have for a trail ready Jeep. Years Covered: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

Please Note: Does NOT Fit "All Wheel Drive" Jeep Models! DOES NOT INCLUDE BUMP STOPS! Rough Country, 2" Suspension, Full Lift Kit, (Hydro 8000) Fits: 1999-2004 Jeep WJ Grand Cherokee Kit Includes: Front: Coil Spring Spacers and Hardware Rear: Coil spring spacers. Shocks: Includes (4) RC Hydro 8000 series shocks. Product Specs: Part #: 695 (Spacers) Part #: 695H (Full Kit) Install Time: 2 - 3 hours Recommended Tire Size: 30x9.50 Wheel Backspacing: Factory Kit Benefits: 100% bolt-on installation Increased ground clearance

Rough Country, 3" Series II Suspension Kit, with Nitro Shocks Fits: 2007-2011 Toyota FJ Cruiser Product Information: Rough Country suspension lift kits are some of the most inclusive kits on the market. Many manufacturers skimp on components but not Rough Country. Great kits at an awesome price and great customer service make Rough Country our top pick. Rough Country suspension lift kits are a great way to fit larger tires, gain extra ground clearance and give your truck a more aggressive look. All kits come complete with all installation hardware and easy-to-understand instructions. While we recommend professional installation, many do-it-yourselfers will be able to install the kits themselves. Please download and read the instructions prior to purchasing to make sure you are aware of what is involved. Also be sure to check application details to make sure this kit fits your truck. Kit Contains: Front: Strut extensions Rear: Luxury ride coil springs Shocks: (2) rear Nitro 9000 series shocks with jounce bumpers Product Features: 100% bolt-on installation Increased ground clearance Easy Install - No strut compressor is required Rear shocks manufactured with recoil cut-off construction Unlike the polyurethane kits, this kit DOES NOT require disassembly of the strut Specifications: Install time: 2-4 hours Recommended tire size: up to 285/70 Years Covered: 2007, 2008, 2009, 2010 and 2011

Rough Country 4" Long Arm Suspension Kit Fits: 1999-2004 Jeep Grand Cheorkee WJ Dimensions: Box 1: Length: 16" Width: 6" Height: 6" Weight: 30 Lbs Box 2: Length: 20" Width: 10" Height: 12" Weight: 55 Lbs Box 3: Length: 16" Width: 3" Height:6" Weight: 20 Lbs Box 4: Length: 16" Width: 10" Height: 10" Weight: 66 Lbs Box 5: Length: 16" Width: 10" Height: 10" Weight 49 Lbs Box 6: Length: 4" Width: 16" Height: 8" Weight 55 Lbs Box 7: Length: 16" Width: 10" Height: 10" Weight 30 Lbs Product Overview: Upgrade your WJ and gain aggressive looks, extreme flex, and enough ride height to run up to 31" tires. The long awaited WJ 4" Longarm Kit is a comprehensive package including everything needed for a great suspension lift while maintaining the vehicle's crucial center of gravity. This top of the line kit focuses on improving off-road handling and articulation while preventing binding and rear steer. This lift kit features high-clearance components with a front 4-link and rear y-link control arm design. This promotes extreme flex while keeping pinion angles optimized. Utilizing adjustable components, this kit can also accommodate future modifications. Kit Includes: Adjustable high-clearance X-Flex upper and lower control arms with Clevite bushings Featuring rebuildable X-Flex joints with Adjustable Retainer Rings and preloadable bushings. Front and Rear coil springs A front adjustable track bar with drop bracket 1/4" thick steel crossmember Skid plate and sway bar disconnects Outfitted with Rough Country's Performance 2.2 shocks, this Longarm Lift Kit is a total solution comprised of top-notch components designed for the avid off-roader who wants the most out of their WJ. Years Covered: 1999, 2000, 2001, 2002, 2003 and 2004

Rough Country, dual Steering Stabilizer Fits: 1987-1995 Jeep Wrangler YJ Special Note: ONLY fits models with stock steering setup ONLY fits models with 4"- 6.5" of Lift Product Overview: This Stabilizer kit puts more control in your hands, reducing the driver fatigue that comes with "fighting" the stiff steering provided by stock stabilizers. For improved ride quality and better handling with lifts from 4" or larger, look no further. Running larger tires on your YJ? Now you can regain greater steering control and increased vibration dampening with Rough Country's new Dual Stabilizer for Jeep YJ. This 50/50 valved setup attaches directly to the drag link, providing noticeably better vibration dampening of bumps, grooves, and obstacles. A dual stabilizer won't just help you take on off-road obstacles with ease, it makes a dramatic difference with highway handling as well. With tires 33" or larger, every crack and bump can jerk your steering wheel around violently, at higher speeds this evolves into the dreaded Death Wobble, a severe jerking that can cause damage to you or your vehicle. Our YJ Dual Stabilizer is engineered to absorb these rough vibrations directly from the drag link before they ever hit your hands. Not only do you instantly gain better handling and ride quality, but you'll reduce wear and tear on your steering components and your hands will thank you for it. Kit Includes: 2 stabilizers mounting brackets hardware Kit Benefits: Easy bolt-on installation. Helps to better stabilize tires 33" and up. Greater dampening power. Prevents front end wobble. Years Covered: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995

Rough Country, Exhaust Extensions Fits: 2012-2013 Jeep Wrangler JK 2012-2013 Jeep Wrangler Unlimited JK Product Information: Ready to lift your 2012 Jeep JK? Rough Country's JK Exhaust Extensions are a crucial component to lifting new model Wranglers 2" or more. These easy to install spacers are fitted between the head-pipe and cross-pipe flanges, effectively moving the exhaust rearward toward the crossmember. Standard, there is insufficient room between the front driveshaft and exhaust pipes, leaving an unextended exhaust to make contact with the driveshaft in downward suspension travel. These durable exhaust spacers are made of 2" cold rolled steel exhaust tubing, flared to nest perfectly within the flanges. By extending the cross-pipe, you gain more than twice the clearance in this crucial area allowing for proper installation of any lift of 2" or more. Recommended to use in conjunction with an aftermarket front drive shaft for 4 - 6" kits to maintain optimum clearance and articulation. Jeep Years Covered: 2012 and 2013

Rough Country Hydraulic Hood Assist Fits: 1997-2006 Jeep Wrangler TJ 2004-2006 Jeep Wrangler Unlimited TJL Dimensions: Length: 30" Width: 4" Height:4" Weight: 5 Lbs Product Details: Increases safety by avoiding the need to mess with the prop rod or rest the hood on the front windshield. RCX" branded mounting bracket. Easy to install. Kit Includes: Gas charged cylinders Upper hood mount Lower mounting brackets hardware. Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

Rough Country, Long Arm Upgrade Kit Fits: 1984-2001 Jeep Cherokee XJ Notes: Upgrade for 4" and 6" kits Only SYE Kit only fits models with NP231 Transfer Case Kit Does Not fit vehicles equipped with the NP242 "Select Trac" transfer case Kit Contents: Front: Lower high clearance arms with X-Flex Joints, upper control arms with X-Flex Joints, long arm mounting crossmember, transfer case skid plate, and hardware Benefits: Flex joints designed by Rough Country Features high clearance lower control arm design Extreme travel long arms keep optimum alignment and give optimum articulation Upgradeable with our Jeep X-tras Install Time: 8-9 Hours

Rough Country, Nitro 9000 Shock Fits: 1982-1986 Jeep CJ (With 4" Lift) 1982-1986 Jeep CJ8 Scrambler (With 4" Lift) Product Information: Rough Country Nitro 9000 shocks feature 'Velocity Sensitive Valving,' a self-adjusting regulator that varies valve resistance according to piston rod speed. This allows for a super smooth highway ride and outstanding control in rugged off road situations from the same shock. No knob turning or shock removal for re-adjustment. Product Details: Performance Proven 10-Stage Variable Valving 200 psi Nitrogen Charged Massive 1 3/8' Bore Chromed Hardened 9/16' Piston Rod Spring Loaded Piston Rod Seal Military Spec. Fluid Rated To 50 C Poly-urethane bushings for long life Limited Lifetime Warranty White powder coat finish Smooth Highway Ride/Firm Off-Road Does NOT Come With Shock Boot Jeep Years Covered: 1982, 1983, 1984, 1985 and 1986

Rough Country, Performance 2.2 Steering Stabilizer with Relocation Bracket Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Keep your stabilizer out of harm's way quickly and easily with Rough Country's new JK Stabilizer Relocation Bracket. This innovative bracket moves the stabilizer from its original location below the axle tube, to a protected location above and behind the steering link. Mounting your stabilizer in this less vulnerable, high-clearance position helps eliminate dents, dings, and other damage your stabilizer might encounter while riding on rough and rocky terrain. This "Hammer Black" powdercoated, durable plate steel bracket works with your Jeep Wrangler JK's original stabilizer or most aftermarket stabilizers as well. Our kit ships with our premiere Performance 2.2 Stabilizer; with a large 2.2" diameter body and 41.4mm Piston that's ready for off-road action. The Performance 2.2 Stabilizer helps eliminate bump steer and reduce front end vibration - especially on adverse terrain. This 100% bolt-on bracket installs quickly and easily thanks to our time-saving design. Product Features: Kit comes with Performance 2.2 steering stabilizer, relocation bracket and Grade 8 hardware. Easy bolt-on installation. Relocation bracket moves stabilizer to a protected location. Reduces tie rod and ball joint wear and tear. Helps eliminate bump steer and reduce front end vibration. Performance 2.2 series stabilizer features:    - Large 2.2" diameter body.   - Massive 41.4 mm diameter piston.   - 17.5mm chrome hardened piston rod. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Rough Country, Rear coil Correction Plates (2) Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Special Note: These Rear Coil Correction Plates are for use with 3.5"-6" Springs Only. Dimensions: Length: 6" Width: 6" Height: 3" Weight: 2 Lbs Product Overview: Run your rear coils at the right angle; these shims correct the rear coil angle of a lifted JK by 10 degrees, thus putting them at the optimum angle for on and off-road applications. A bowed coil spring can rub against the track-bar bracket or other components. Utilizing a correction shim keeps the coil straight, thus prolonging the life of the coil itself as well as giving a more pleasurable driving experience. Rough Country now offers these shims pre-included in the popular Jeep JK 3.5", 4", 4" X-Series, and 6" X-series kits. These correction shims may also be purchased separately, and are easy to install on existing equipment. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Rough Country, Winch Mounting Plate Fits: 1999-2004 Jeep Grand Cheorkee WJ Note: Bumper Triming is Required with this Winch Mounting Plate Dimensions: Length: 10" Width: 10.50" Height: 35" Weight: 52 Lbs Product Information: Introducing the all new WJ Winch Plate by Rough Country Suspension Systems, the first truly affordable recovery solution for Jeep WJ. This 1/4" thick steel plate lends a more aggressive look to the front of your WJ, while providing peace of mind knowing you've got what it takes to get out of any tough spots the trails might throw your way. Product Benefits: Mounts to factory front bumper! Secures to frame behind front bumper. Includes Grade 8 hardware. Aggressive appearance. Will accommodate most winches on the market. Years Covered: 1999, 2000, 2001, 2002, 2003 and 2004

These Upper Control Arms come as a PAIR and are NOT available individually! Rough Country, X-Flex - Adjustable Front Upper Control Arms, (Pair) Fits: 1997-2006 Jeep Wrangler TJ Product Information: Tubular adjustable control arms with Flex Joints, polyurethane bushings, sleeves, and grease fittings. Product Description: Fully adjustable control arms replace your factory stamped sheet metal OE arms and allow for better articulation and more control off road but does not sacrifice on road handling. They are fully greasable, and come with highly durable polyurethane bushings. A must have for a trail ready Jeep. Product Benefits: Clevite OEM style rubber bushings. Fully greasable. Completely rebuildable X-Flex joints Adjustable retainer ring Increased longevity Upper joints pivot up to 20 degrees Lower joints pivot up to 35 degrees Allows for greater articulation off-road. Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

Rough Country Rear Axle Dana 44/ AMC 20 U-Bolt Kit Fits: 1969-1975 Jeep CJ5 1969-1975 Jeep CJ6 Product Information: This is a Rough Country Front Axle Dana 30 replacement U-Bolt Kit for part # RC-605H & RC-605N Lift Kits. Years Covered: 1969, 1970, 1971, 1972, 1973, 1974 and 1975