Buy "poison spyder customs inc." online - search for the best price - compare prices

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Brawler Bar Fits: 1987-1995 Jeep Wrangler YJ Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Brawler Bar Fits: 1997-2006 Jeep Wrangler TJ 2004-2006 Jeep Wrangler Unlimited TJL Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Brawler Bar Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Comp Stinger Fits: 1987-1995 Jeep Wrangler YJ Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Comp Stinger Fits: 1997-2006 Jeep Wrangler TJ 2004-2006 Jeep Wrangler TJL Unlimited Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Comp Stinger Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Stinger Fits: 1997-2006 Jeep Wrangler TJ 2004-2006 Jeep Wrangler Unlimited TJL Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

Poison Spyder BFH Front Bumper Bare Steel with Shackle Tabs & Stinger Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Poison Spyder BFH Front Bumper Bare Steel with Stinger Fits: 1997-2006 Jeep Wrangler TJ 2004-2006 Jeep Wrangler Unlimited TJL Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

Poison Spyder BFH Front Bumper Bare Steel with Stinger Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Poison Spyder BFH Front Bumper Bare Steel with Stinger Fits: 1987-1995 Jeep Wrangler YJ Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. Years Covered: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995

Poison Spyder BFH Front Bumper with Brawler Bar, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs BFH Front Bumper with Brawler Bar, Bare Steel is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Bumper with Comp Stinger, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs BFH Front Bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Bumper with Shackle Tabs & Brawler Bar, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs BFH Front Bumper with Shackle Tabs and Brawler Bar, is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cu from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Bumper with Shackle Tabs & Comp Stinger, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs BFH Front Bumper with Shackle Tabs & Comp Stinger, Bare Steel is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Bumper with Shackle Tabs & Stinger, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs BFH Front Bumper with Shackle Tabs & Stinger, Bare Steel is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Bumper with Shackle Tabs, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs BFH Front Bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Bumper with Stinger, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs Poison Spyder BFH Front Bumper with Stinger, Bare Steel is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The optional Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Bumper, Bare Steel Fits: 1981-1986 Jeep CJ8 Scrambler 1976-1986 Jeep CJ7 1976-1983 Jeep CJ5 Product Overview: Poison Spyder Customs BFH Front Bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. Years Covered: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 and 1986

Poison Spyder BFH Front Disco Skid Bare Steel Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The JK BFH Disco Skid is an optional bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16" plate steel and is designed to be a great looking, functional addition to the JK BFH bumper. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

**Install required cutting of stock frame rails** Poison Spyder BFH Rear Bumper Bare Steel Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: The Poison Spyder Customs BFH rear bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance and departure angle possible. It is no wider than the Jeep's rear body tub, with angled facets to improve its ability to slide over the rocks. The BFH is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit. The basic rear BFH bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Poison Spyder BFH Rear Bumper Bare Steel Fits: 1997-2006 Jeep Wrangler TJ 2004-2006 Jeep Wrangler Unlimited TJL Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

**Install required cutting of stock frame rails** Poison Spyder BFH Rear Bumper Bare Steel with Shackle Tab Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: The Poison Spyder Customs BFH rear bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance and departure angle possible. It is no wider than the Jeep's rear body tub, with angled facets to improve its ability to slide over the rocks. The BFH is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit. The basic rear BFH bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in departure angle. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Poison Spyder BFH Rear Bumper Bare Steel with Shackle Tabs Fits: 1997-2006 Jeep Wrangler TJ 2004-2006 Jeep Wrangler Unlimited TJL Years Covered: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006

**Drilling required** Poison Spyder Body Armor Pair, Bare Aluminum Fits: 2007-2013 Jeep Wrangler Unlimited JK 4 Door Product Information: Poison Spyder Jeep Wrangler Unlimited JK Body Armor is recommended equipment for any Jeep Wrangler Unlimited JK venturing into off road situations where body damage is eminent. Jeep Wrangler Unlimited JK Body Armor protects the thin factory sheetmetal with rugged, precision-fit 3/16" plate steel or aluminum. Used by itself, Jeep Wrangler Unlimited JK Body Armor hugs the Jeep's body contours to provide protection with no loss of ground clearance. Used with the factory Rubicon rocker rails, the Jeep Wrangler Unlimited JK Body Armor helps prevent trail damage that can be caused by rocks pushing the factory rocker rails up into the body. And used with Poison Spyder's Jeep Wrangler Unlimited JK Rocker Knockers, the Jeep Wrangler Unlimited JK Body Armor provides one more line of defense for your Jeep Wrangler Unlimited JK, in the most complete, strongest, best looking package of rocker panel protection gear available for the Jeep Wrangler Unlimited JK. Jeep Wrangler Unlimited JK Body Armor is manufactured from either 3/16" high pressure steel plate or 3/16" 6061-T6 aluminum plate. Steel is preferred where the Jeep Wrangler Unlimited JK Body Armor will be installed by itself, without Rocker Knockers or other rocker panel protection. Aluminum is recommended where Rocker Knockers, the stock Rubicon rocker rails or other rocker panel protection will also be used. The aluminum pieces are much lighter weight (27 lbs. lighter for the 4-door versions), yet still provide excellent load distribution characteristics when used as a secondary barrier in conjunction with external rocker rails. Both steel and aluminum versions may be painted or powdercoated prior to installation, but only the aluminum ones may be installed raw without any protective coating. They may also be polished or clear-coated at the installer's discretion. Both steel and aluminum parts are CNC-laser cut and precision brake-formed for a precise fit to the unique contours of the Jeep Wrangler Unlimited JK body. Bolt holes are countersunk, and stainless steel flat head cap screws are supplied for a clean, flush-surface installation. Drilling of the body is required for installation. Jeep Wrangler Unlimited JK Body Armor is available bare (unfinished) or with a durable black powder coat finish. When selecting the powder coat option, please allow an extra 5-10 business days for delivery. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013