Buy "jks manufacturing, inc." online - search for the best price - compare prices

JKS Jam Nuts with 24mm LH & RH Threads, Pair 1999-2004 Jeep Grand Cherokee WJ Product Information: Order one pair of these jam nuts for each FAB Parts Tie Rod or Drag Link to ensure proper set-up and adjustment prior to installation. Each pair includes one right-hand, and one left-hand threaded jam nut. Zinc plating prevents corrosion. Years Covered: 1999, 2000, 2001, 2002, 2003 and 2004

SPECIAL NOTE: Not compatible with Coil Spring Conversion Kits. JKS Manufacturing Telescoping Front Track Bar Fits: 1987-1995 Jeep Wrangler YJ Product Information: By releasing the front track bar, your YJ Wrangler can experience up to a 31% increase in wheel travel! Simply loosen a 9/16 nut and the track bar slips within itself for off-road. The Teflon lined heim joints add durability and increased travel even when connected. For use on 1987-95 Wranglers with 0 to 6 of lift. Product Details Provides 31% more suspension travel than solid trackbar for improved off-road performance. Retains stability of trackbar on-road for proper handling and safe highway operation. Greasable slip-shaft design ensures smooth, silent operation. Prevents undue stress and premature failure of related suspension components. Eliminates the need for trackbar relocation brackets that often induce bump steer.

Special Notes: Welding is required for mounting the rear spacers. JKS Rear Adjustable Coil Over Spacer System Fits: 1997-2006 Jeep Wrangler TJ Unlimited (Rubicon) Product Information: Adjust the height of your lift! Most aftermarket coil spacers are available in certain sizes only and do not always suit each individual vehicle or owners needs. The ACOS System allows you to fine tune your suspension, adjusting it for the added weight of bumpers, winches, sagging springs, tire size changes, or leveling your Jeep from side to side or front to back! There is a minimum of 1-1/4 of lift built into the system, and it is infinitely adjustable after that. For front coil suspension only. Product Details: Conveniently adjust ride height without removing any suspension components. Compensates for uneven load distribution, spring settling, and sagging. Eliminates need to replace coil springs to accommodate future modifications. Instantly increases vehicle ride height upon installation for immediate benefits. Technically advanced design and billet construction dramatically enhances suspension appearance.

Special Notes: Requires lower control arms to be same length as OE for proper bump stop allignment. Supplied Coil Spring Retainers serve as bump stop landing pads. JKS Rear Adjustable Coil Over Spacer System, 2-4" Lift Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Adjust the height of your lift! Most aftermarket coil spacers are available in certain sizes only and do not always suit each individual vehicle or owners needs. The ACOS System allows you to fine tune your suspension, adjusting it for the added weight of bumpers, winches, sagging springs, tire size changes, or leveling your Jeep from side to side or front to back! Product Details: 2 and 4-door models. Rear application. 2-4" of lift. Compensates for uneven load distribution, spring settling, and sagging. Eliminates need to replace coil springs to accommodate future modifications. Instantly increases vehicle ride height upon installation for immediate benefits. Technically advanced design and billet construction dramatically enhances suspension appearance. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Special Notes: Not compatible with some aftermarket track bar extension/relocation brackets. Call for details. JKS Rear Adjustable Coil Spring Mount Kit Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Until recently, correcting rear spring mount alignment on vehicles equipped with a CV driveshaft has been a difficult challenge for JK owners. Fortunately, JKS Manufacturing now offers a solution to this problem that is both simple and affordable. Adjustable Spring Mounts install directly in place of the factory lower coil mounts on the rear axle housing. The folded, heavy-gauge steel brackets form extremely strong mounting pads that are easily adjusted to match the angle of the upper spring mounts. As a result, the coil springs are able to function as originally intended and interference with the rear track bar is eliminated. Product Details: 2 and 4-door models. Establishes proper alignment of upper and lower spring mounts. Eliminates interference between coil springs and rear track bar. Bolt-on design requires no welding for easy setup and installation. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

JKS Rear Adjustable Cross-Over Shock Mount Kit, 4+ Lift Fits:1984-2001 Jeep Cherokee XJ Product Information: The Adjustable Cross-Over Shock Mount reconfigures the rear shock mounting points for much greater control over shock selection, performance and ride quality. It provides Cherokee XJ owners with four upper shock mounting locations as opposed to the single location supplied by the factory. The improved mounting flexibility makes it possible to optimize shock performance and suspension travel for each unique application. Product Details: Heavy duty shock mounting studs eliminate factory bar pin design for improved bushing longevity and reduced noise. New mounting location increases selection of compatible shock absorbers and improves access for painless adjustments. Four rear mounting configurations enable optimization of shock performance and suspension travel for each application. It is necessary to install longer shock absorbers to achieve full suspension travel.

Notes: Tightening The bolts with the vehicle raised may cause premature bushing wear due to preloading the bushings! JKS Rear Adjustable Lower Control Arm Kit, 0-6" Lift Fits: 1999-2004 Jeep Grand Cherokee WJ Product Information: These JKS Adjustable Control Arms are the heaviest duty units on the market today! With over 3 inches of adjustment, changing the length is as simple as removing one end of the arm and rotating it to the desired length. These arms also twist or rotate while driving to allow the axle to flex easily, and they use factory OEM bushings at both ends to reduce noise. The units are greasable, come pre-greased, and are sealed using a spring loaded crankshaft style seal. Black powdercoat and zinc plated. For use with any lift kit. Product Details: Sold in pairs. Durable powdercoat finish and zinc plating provide excellent protection. Threaded body utilizes superior 18 threads-per-inch versus inferior 5 threads-per-inch used by competitors. Lubricated threads and internal brass bearing for smooth operation and excellent longevity.

Notes: Tightening The bolts with the vehicle raised may cause premature bushing wear due to preloading the bushings! JKS Rear Adjustable Lower Control Arm Kit, 0-6" Lift Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: These JKS Adjustable Control Arms are the heaviest duty units on the market today! With over 3 inches of adjustment, changing the length is as simple as removing one end of the arm and rotating it to the desired length. These arms also twist or rotate while driving to allow the axle to flex easily, and they use factory OEM bushings at both ends to reduce noise. The units are greasable, come pre-greased, and are sealed using a spring loaded crankshaft style seal. Black powdercoat and zinc plated. For use with any lift kit. Product Details: 2 and 4-door models. Sold in pairs. Rear adjustable lower control arms. Lubricated threads and internal brass bearing for smooth operation and excellent longevity. Durable powdercoat finish and zinc plating provide excellent protection. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

JKS Rear Adjustable Swaybar End Link Kit, 2.5"-6" Lift Fits: 1997-2006 Jeep Wrangler TJ and Unlimited (Rubicon) Product Information: The adjustable design accommodates all 1997-06 Jeep Wrangler models lifted up to 6". The ends of each End Link feature rolled threads for increased strength and fatigue resistance. Special zinc plating is applied to prevent corrosion and ensure long lasting protection. Product Details: Corrects geometry and improves performance of rear swaybar on lifted vehicles. New polyurethane bushings reduce loss of motion between chassis and suspension for improved handling. Maintains proper balance between front and rear swaybars for safer, more predictable on-road driving. Special zinc plating applied for corrosion resistance and long lasting protection.

Special Notes: Vehicle must be equipped with CV-type rear driveshaft w/double cardan U-joint. Includes required axle bracket JKS-OGS160 for CV type driveshaft. JKS Rear Adjustable Track Bar w/JKS-OGS160 Bracket Kit, 3+ Lift Fits: 1997-2006 Jeep Wrangler TJ (Rubicon) Product Information: Easily center your axle under your Jeep! One turn of the adjuster shifts the axle approximately 1/16 so you can fine tune your axle center very precisely. Made from 1-1/4 x 0.156 DOM tubing, this bar uses a greasable and rebuildable Johnny Joint at the frame end and a zinc plated adjuster using the factory OEM style rubber bushing on the axle end. Black powdercoat finish. Installation requires minor drilling. Product Details: Zinc plated and powder coated for excellent protection from corrosion and debris. Properly aligns axle housing with chassis on coil sprung Jeeps. Prevents undue stress on related components and centers swaybar for proper disconnect operation. Ultra-strong, DOM tube construction features OE bends for correct geometry and clearance alignment.

JKS Rear Adjustable Track Bar, 1-6 Lift Fits: 1993-1998 Grand Cherokee ZJ Product Information: Easily center your axle under your Jeep! One turn of the adjuster shifts the axle approximately 1/16 so you can fine tune your axle center very precisely. Made from 1-1/4 x 0.156 DOM tubing, this bar uses a greasable and rebuildable Johnny Joint at the frame end and a zinc plated adjuster using the factory OEM style rubber bushing on the axle end. Black powdercoat finish. Product Details: Durable powdercoat finish and zinc plating provide excellent protection. Properly aligns axle housing with chassis on coil sprung Jeeps. Ultra-strong, DOM tube construction features OE bends for correct geometry and clearance.

Special Notes: Installation requires minor drilling JKS Adjustable Track Bar Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Easily center your axle under your Jeep! One turn of the adjuster shifts the axle approximately 1/16 so you can fine tune your axle center very precisely. Made from 1-1/4 x 0.156 DOM tubing, this bar uses a greasable and rebuildable Johnny Joint at the frame end and a zinc plated adjuster using the factory OEM style rubber bushing on the axle end. Black powdercoat finish. Product Details: 2 and 4-door models0-6" lift Properly aligns axle housing with chassis on coil sprung Jeeps Prevents undue stress on related components and centers swaybar for proper disconnect operation Ultra-strong, DOM tube construction features OE bends for correct geometry and clearance. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Notes: Tightening The bolts with the vehicle raised may cause premature bushing wear due to preloading the bushings! Compatible with TJ Rubicon and Unlimited models. JKS Rear Adjustable Upper Control Arm Kit, 0-6" Lift Fits: 1997-2006 Jeep Wrangler TJ & 1993-1998 Jeep Grand Cherokee ZJ Product Information: These JKS Adjustable Control Arms are the heaviest duty units on the market today! With over 3 inches of adjustment, changing the length is as simple as removing one end of the arm and rotating it to the desired length. These arms also twist or rotate while driving to allow the axle to flex easily, and they use factory OEM bushings at both ends to reduce noise. The units are greasable, come pre-greased, and are sealed using a spring loaded crankshaft style seal. Black powder coat and zinc plated. For use with any lift kit. Product Details: Sold as a pair. Lubricated threads and internal brass bearing for smooth operation and excellent longevity. Spring-loaded, crankshaft type seal prevents moisture and debris contamination. Heavy duty construction is far stronger than the thin gauge stamped metal OE suspension arm. Threaded body utilizes superior 18 threads-per-inch. Durable powdercoat finish and zinc plating provide excellent protection.

JKS Rear Bar Pin Adapter Kit Fits: 2007-2013 Jeep Wrangler JK Unlimited (Rubicon) Product Information: This clever variation of our Bar Pin Eliminator enables the fitment of professional off-road racing shock absorbers to your Jeep. The cross pins are designed to accommodate 1/2" or 12mm ID spherical bearings utilized by manufacturers such as Bilstein, Sway-A-Way and Fox. Product Details: Sold in pairs 2 and 4-door models Accommodates installation of professional off-road racing shock absorbers Mounting pin accommodates 12mm or 1/2" ID x 5/8" wide spherical rod bearings Anti-corrosive plating and hardware ensure long-lasting protection Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Special Notes: Not compatible with Old Man Emu shock absorbers. JKS Rear Bar Pin Eliminator Kit Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Details: 2 and 4-door models. Compatible with OE and aftermarket shock absorbers.Retains original mounting alignment to prevent stress on shock absorber and bushing. Zinc plated, premium grade steel components for corrosion resistance. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

JKS Rear Coil Retainer Kit Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: If you've installed longer shock absorbers on your Jeep without securing the coil springs to the axle, you may have unknowingly created a dangerous situation for yourself. The extra suspension travel you gained could actually cause a coil spring to become unseated at the worst possible moment. Fortunately, JKS offers an inexpensive and simple solution to this increasingly common problem. Product Details: 6061 machined aluminum. Slim design prevents spring interference. All hardware included. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

JKS Rear OE Replacement Trackbar Bracket Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: The OE Replacement Trackbar Bracket from JKS is a heavy duty upgrade for the damaged factory part. Simply weld the new JKS bracket directly to the axle tube in the same location as the original. The new bracket is constructed of heavy gauge steel and properly formed to resist lateral track bar forces. Install the OE Replacement Trackbar Bracket alone for a significant strength increase over the factory bracket. Or combine it with our Rear Trackbar Brace for a heavily reinforced track bar mount that is truly indestructible. Product Details: 2 and 4-door models.Heavy duty upgrade. Welding required. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Special Notes: Requires shock absorber to be installed in the inverted (body up, shaft down) position. JKS Rear Shock Extension Kit , Over 3.5" Lift Fits: 1997-2006 Jeep Wrangler TJ Unlimited (Rubicon) Product Information: Rear Shock Extensions eliminate interference between the shock absorber and axle housing - a problem that commonly occurs on Wrangler TJ models when a CV-type driveshaft is installed. This is achieved by relocating the lower rear shock mounts away from the axle housing. The additional clearance provides plenty of room for the shock absorbers to be installed without any interference. Product Details: Sold as a pair Durable powdercoat finish provides excellent corrosion resistance. Protects shock absorbers from irreparable damage and prevents catastrophic shock mount failure. Easy, bolt-on installation requires no modifications.

Special Notes: Compatible with Rubicon and Unlimited models Not compatible with Old Man Emu shock absorbers. JKS Rear Top Bar Pin Eliminators Fits: 1997-06 TJ Wrangler1984-01 XJ Cherokee Product Information: Bar Pin Eliminators utilize a cleverly constructed system of blocks and pins machined from premium grade, zinc plated steel. When installed, the blocks actually squeeze the bushing to create the recommended amount of crush specified by bushing manufacturers, thus providing the ideal environment for proper bushing operation. The smooth, machined surfaces of the Bar Pin Eliminator reduce friction at the bushing surface, unlike the porous and corrosion prone, substandard metals used for most bar pins. And unlike other designs on the market, JKS Bar Bin Eliminators mount to the vehicle in alignment with suspension movement, taking advantage of bushing rotation and reducing stress on the shock absorber and bushings. Protective zinc plating, corrosion resistance and JKS Bar Pin Eliminators prevent distortion of the shock absorber bushings by adding lateral compression, or preload. This ensures the bushings maintain their shape and deflect suspension impact forces to the shock absorbers, thus preventing the annoying noises and premature bushing failure common with standard bar pins. Product Details: Sold as a pair Converts front upper stud type shock mount to accept traditional EB1 hourglass type bushings. Provides necessary mounting type for extreme-travel aftermarket shock absorbers. Replaces original 3/8 threaded mounting stem with larger 7/8 bolt for greater strength and security. Relocates upper shock mount 1.10 lower for easy bolt access and additional droop.

JKS Rear Track Bar Relocation Bracket Kit, CV Driveline, Over 3.0" Lift Fits: 1997-2006 Jeep Wrangler TJ Supplied with Adjustable Trackbar JKS-OGS151B for CV type driveshaft. Product Details: Over 3.0" lift.Jeep must have CV style driveshaft. Black powdercoat. Corrects track bar angle to compensate for pinion angle change. Bolt-on bracket raises and rotates mounting point on axle end for correct alignment.

Note: Vehicles lifted over 3.0" must be equipped with adjustable rear track bar and/or adjustable upper control arms JKS Rear Trackbar Relocation Bracket Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: Track Bar Relocation Brackets from JKS Manufacturing permanently correct geometry of the rear track bar following the installation of a CV-type driveshaft. The bolt-on bracket realigns the mounting point on the axle with the track bar and eliminates the binding problem caused by the rotated axle housing. As a result, the track bar and its bushings are returned to a neutral position and unwanted stresses are relieved from the mounting points. Our Relocation Brackets also raise the mounting point on the axle to reduce track bar operating angles and minimize side-to-side axle movement. This improves vehicle stability on lifted vehicles at higher speeds and helps keep the axle centered beneath the chassis at all times. A heavy, steel crush-proof sleeve fits inside the factory bracket to ensure maximum torque can be applied to the mounting hardware without risk of loosening or distortion over time. Features: Heavy-duty reinforcement bracket mounts directly to factory track bar bracket on axle housing Angled design corrects rear track bar geometry on lifted vehicles that have rotated axle housing or CV-type driveshaft Relocated mounting point tilts forward to eliminate binding and premature bushing wear Premium steel construction is laser cut, formed and folded for maximum strength Economical bolt-on solution minimizes risk of track bar failure on the trail Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

JKS Rear Trackbar Skid-Brace System Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: The Rear Trackbar Brace is a highly effective and economical solution to a problem that has plagued many owners of 2007+ Wrangler JK models. The problem involves the factory trackbar mount on the rear axle housing. An alarming number of rear trackbar failures have been reported due to insufficient bracing of the factory mount. Most failures occur after the vehicle has been lifted, especially when aftermarket extension brackets are involved. However, some have even experienced failure on stock applications. Product Details: Constructed from 7-gauge steel. Fits perfectly over the factory mount. Heavy-duty design.Brace wraps under the axle housing and attaches on the opposite side. Distributes forces over a greater area. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

JKS Shock Mount Adapter Kit, Front Upper Fits: 2007-2013 Jeep Wrangler JK Unlimited (Rubicon) 1997-2006 Jeep Wrangler TJ Unlimited (Rubicon) 1987-1995 Jeep Wrangler YJ 1984-2001 Jeep Cherokee XJ 1986-1992 Jeep Comanche MJ 1999-2004 Jeep Grand Cherokee WJ 1993-1998 Jeep Grand Cherokee ZJ Product Information: Based on our popular Shock Conversions, JKS Shock Adapters convert the OE upper front shock mounts to accommodate professional off-road racing shock absorbers. They bolt to the original shock mounts using massive 7/8" threaded studs and locking nuts. Product Details: Converts front upper stud type shock mount to accept professional off-road racing shock absorbers Replaces original 3/8" threaded mounting stem with larger 7/8" bolt for greater strength and security Relocates upper shock mount 1.10" lower for easy access and additional droop Jeep Years Covered:1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Notes: Weld-on installation recommended; bolt-on installation optional. Compatible with Rubicon and Unlimited models. Jks Steering Stabilizer Relocation Bracket Fits: 2007-2013 Jeep Wrangler JK Product Information: Our Steering Stabilizer Relocation Bracket is constructed from premium 0.25" steel and precision cut, formed and folded to provide incredible strength and a perfect fit. A heavy-duty mounting stud for the stabilizer is robotically welded to the bracket with premium hardware supplied to ensure a safe, secure connection. The entire bracket is covered with a durable zinc plating that provides a highly attractive and ultra protective finish for extreme atmospheric conditions. The relocation bracket offers two options for vehicle attachment. A bolt-on installation using the high-quality fasteners supplied is a perfect choice for JK owners that only seek a more effective stabilizer location. An optional weld-on installation fuses the bracket to strategic points on the axle housing which effectively reinforces the otherwise weak factory trackbar bracket. This serves as an excellent alternative to our larger Front Trackbar Brace (PN OGS161) on vehicles without an inverted drag link. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

JKS Front Swaybar Quicker Disconnect System Fits: 1997-2006 Jeep Wrangler TJ & Unlimited (Rubicon) - 0 - 2.0" Lift 1984-2001 Jeep Cherokee XJ - 2.0 - 3.5" Lift 1986-1992 Jeep Commanche MJ - 2.0 - 3.5" Lift 1993-1998 Jeep Grand Cherokee ZJ - 2.0 - 4.0" Lift Product Information: To disconnect the Quicker Disconnects, simply remove the click pin and slide the bottom floating bushing off the axle mounted stainless steel pin. These disconnects are also length adjustable to accommodate different sized lifts or unleveled Jeeps. A single grease zerk fitting greases both bushings at the same time. Gloss black powder coat. Made in the USA. Product Details: Dramatically increases suspension travel and improves off-road performance on stock or modified Jeeps Greasable QuadZerk design allows each bushing to receive lubrication independently Heavy gauge steel construction ensures unsurpassed strength and quality JKS exclusive Dura-Thane fluted bushings distribute grease evenly