Buy "hanson offroad" online - search for the best price - compare prices

NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper. Hanson Offroad, Medium Basic Front Bumper With Light Provision Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use and allows for maximum wheel clearance and good fender protection. It's handcrafted from 3/16" cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2" dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The unique placement and design of the 1" wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8" pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Hanson Offroad, Rear Lower Rocker Panels Fits: 1984-2001 Jeep Cherokee XJ Product Overview: These hand formed 3/16" rear lower rocker guard is made specifically for the Cherokee XJ. The panels follow the stock XJ body lines and compliment our rear bumper as well. Rivet nuts included for strudy mounting to the body. Finished in sem-gloss black powdercoat. Jeep Years Covered: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, and 2001

Hanson Offroad, Roller Fairlead Mount, (Black Semi-Gloss Powder Coat) Fits: All Hanson Front Bumpers (With Integrated Solenoid Winches Only) Product Information: This is Hansons standard fairlead mount. It sandwiches between the winch and bumper to create a location to bolt up your fairlead. It will accept Warn, Ramsey, MileMarker, Superwinch and other brands of winches in the 9500 lb. or smaller class that have a 4-bolt mounting pattern.

NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper. Hanson Offroad, Stubby Front Bumper with Winch Guard Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler Unlimited JK Product Information: The shorter width of this bumper provides full tire exposure for maximum approach angles. The stout design allows for maximum wheel clearance and front-end protection. It's handcrafted from 3/16 inch cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2 inch dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The winch bar is constructed of 1 ¾ inch diameter x .120 wall tubing and is angled forward and welded for strength. The unique placement and design of the 1 inch wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8 inch pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat. Jeep Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013

Hanson Rear Bumper With Square Frame Tire Carrier Fits: 2007-2013 Jeep Wrangler JK 2007-2013 Jeep Wrangler JK Unlimited Product Information: This Cargo Basket Compatible bumper is made of 3/16'' steel, that is laser cut and formed. It has a drop down deck in it to allow the rear tire to be mounted lower. It also has a built in 2'' class 2 receiver for hauling and towing. The tire carrier is all new and similar to the TJ square frame unit. It features a 3/16'' upper latch plate that mounts to the tailgate and will accept all Hanson cargo packages! The tire carrier, carries a 37'' tire with no problems or rattles. It will carry a 48'' HiLift as shown in the picture. Tire carrier opens very easily. It uses a bear claw latch very similar to a car door latch, gentle pull release lever the unit unlocks and is ready to open. Years Covered: 2007, 2008, 2009, 2010, 2011, 2012 and 2013